Heavy Duty Motorised Test Stands

Andilog Stentor | Atlas

Stentor

The Stentor 1000, 2500 and 5000 are designed to carry out tests for all applications in which the displacement speed is specified by a standard. The speed and displacement values are shown continuously on the console display. The Stentor control system can optionally include a force control unit with two functions:

Speed setting.
Maintaining a preset force level.

Features

Base supports a large worktable (300 x 450 mm) with easy access
Fixing holes provided for easy assembly of fixing tools
Force gauge is fitted on mobile crosshead actuated by a ball screw system
Displacement carried out using linear guidance system inside test stand body
Adjustable mechanical or digital limit switches
Each limit switch has 2 functions, stop or reversal for cyclical tests
Control console can be used to start the test, control fast upward and downward movement and set the test parameters:
- Speed setting between 10 and 350 mm/ minute upwards and downwards
- Stopping or reversal of movement when the crosshead reaches the limit switches
- Stopping or reversal of movement based on a displacement value (digital limit switches)
- Stopping or reversal of movement based on the force value (optional)
- Number of working cycles

Atlas

The Atlas 5 to 50 KN test machine is designed to carry out a range of tests which exceed 5KN load. It’s powerful motor and twin-column structure gives this machine the same basic functions as the Stentor.

Features

Base supports large worktable
Fixing holes provided for easy fitting of fixing tools.
Fitted on a mobile crossbar moved by a twin ball screw system.
Mobile crossbar is guided by system of twin columns inside test stand body.

Atlas machines use the same control consoles as Stentor test stands.